▼Recommended Inserts：KENNAMETAL/WIDIA
| Oder No. | Insert | Dimensions(mm) | Parts | Wrench | |||||
|---|---|---|---|---|---|---|---|---|---|
| Right / Left |  |
DCON | WF | LF | DAXIN | Clamp |  |
 |
|
| R | L | ||||||||
| S12M-UNTOR/L2 | N*L/R2 / NG2M | 12 | 11 | 150 | 18.5 | CPK4B | CPK3B | CSH3512 | LW025 |
| S16M-UNTOR/L2 | N*L/R2 / NG2M | 16 | 11 | 150 | 22.0 | CPK4 | CPK3 | CSH3512 | LW025 |
| S20Q-UNTOR/L2 | N*L/R2 / NG2M | 20 | 13 | 180 | 26.0 | CPK4 | CPK3 | CSH3512 | LW025 |
| S25R-UNTOR/L2 | N*L/R2 / NG2M | 25 | 17 | 200 | 34.0 | CPK4 | CPK3 | CSH3512 | LW025 |
| S25R-UNTOR/L3 | N*L/R3 / NG3M | 25 | 17 | 200 | 34.0 | CPK2 | CPK1 | CSH0516 | LW040 |
| S32S-UNTOR/L3 | N*L/R3 / NG3M | 32 | 22 | 250 | 44.0 | CPK2 | CPK1 | CSH0516 | LW040 |
| S40T-UNTOR/L3 | N*L/R3 / NG3M | 40 | 27 | 300 | 54.0 | CPK2 | CPK1 | CSH0516 | LW040 |
N**L: Right hand insert 右手刀片
N**R: Left hand insert 左手刀片
| Ordering Code | UN123 | W | L | R | T | S |
|---|---|---|---|---|---|---|
| NGR21000 | * | 1.00 | 1.3 | 0.0 | 3.81 | 5.56 |
| NGR21500 | * | 1.50 | 2.8 | 0.0 | 3.81 | 5.56 |
| NGR22020 | * | 2.00 | 2.8 | 0.2 | 3.81 | 5.56 |
| NGR22520 | * | 2.50 | 2.8 | 0.2 | 3.81 | 5.56 |
| NGR31500 | * | 1.50 | 2.4 | 0.0 | 4.95 | 8.74 |
| NGR32020 | * | 2.00 | 2.4 | 0.2 | 4.95 | 8.74 |
| NGR32520 | * | 2.50 | 3.8 | 0.2 | 4.95 | 8.74 |
| NGR33020 | * | 3.00 | 3.8 | 0.2 | 4.95 | 8.74 |
| Ordering Code | UN123 | W | L | R | T | S |
|---|---|---|---|---|---|---|
| NRR210050 | * | 1.00 | 1.5 | 0.50 | 3.81 | 5.56 |
| NRR215075 | * | 1.50 | 2.5 | 0.75 | 3.81 | 5.56 |
| NRR220100 | * | 2.00 | 2.5 | 1.00 | 3.81 | 5.56 |
| NRR225125 | * | 2.50 | 2.5 | 1.25 | 3.81 | 5.56 |
| NRR320100 | * | 2.00 | 2.0 | 1.00 | 4.95 | 8.74 |
| NRR325125 | * | 2.50 | 3.5 | 1.25 | 4.95 | 8.74 |
| NRR330150 | * | 3.00 | 3.5 | 1.50 | 4.95 | 8.74 |
| NRR335175 | * | 3.50 | 3.5 | 1.75 | 4.95 | 8.74 |
| NRR340200 | * | 4.00 | 3.5 | 2.00 | 4.95 | 8.74 |
| NRR345225 | * | 4.50 | 3.5 | 2.25 | 4.95 | 8.74 |
