| Order No. | Insert | Dimensions(mm) | Parts | Wrench | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Right/Left |  |
柄徑 | 工作寬度 | 切深 | 長度 | 最小加工徑 | 頭長 | 徑向前角 |  |
 |
| DCON | WF | E1 | LF | DMIN | LH | GAMF | ||||
| S10M-SDZCR/L07 | DCMT0702 | 10 | 8.5 | 3.5 | 150 | 14 | 11 | 10° | CS25061S | FT-7 |
| S12M-SDZCR/L07 | DCMT0702 | 12 | 10.5 | 4.5 | 150 | 17 | 11 | 9° | CS25061S | FT-7 |
| S16Q-SDZCR/L07 | DCMT0702 | 16 | 12.5 | 4.5 | 180 | 21 | 11 | 8° | CS25061S | FT-7 |
| S20R-SDZCR/L11 | DCMT11T3 | 20 | 15.5 | 5.5 | 200 | 26 | 16 | 8° | CS35095 | FT-15 |
| S20S-SDZCR/L11 | DCMT11T3 | 20 | 15.5 | 5.5 | 250 | 26 | 16 | 8° | CS35095 | FT-15 |
| S25R-SDZCR/L11 | DCMT11T3 | 25 | 18 | 5.5 | 200 | 33 | 20 | 6° | CS35095 | FT-15 |
| S32S-SDZCR/L11 | DCMT11T3 | 32 | 21.5 | 5.5 | 200 | 38 | 20 | 4° | CS35095 | FT-15 |
